Bowl-Tech

05/02/2026

Disassemble 82-30 Discussion on Bowl-Tech -

Anyone know of a easyish disassembly instruction set. After 67 years these monsters are being replaced. Thinking just start sweep, table, motors, distributor then have room to move around then slowly take out everything else top to bottom? I'm sure cutting some stuff out since I'd put a guess out th...

04/18/2026

New pins double shuttle discussion on Bowl-Tech -

I have a lane that shuttled fine with old pins. I put brand new pins in and the 2 pin double shuttled. I lengthened the shuttle rod, weather got colder and the problem went away. Its warmed back up and the problem has resurfaced. All bin guides and hardware are there and tight, so I have changed out...

04/18/2026

Score corrections do not update at the lanes DuoHD on Bowl-Tech -

Hi all, We are having an issue after upgrading to DuoHD from Solo, whenever a score correction is done at the front desk, the change doesn’t get pushed to the lane. Any idea what to check? The front desk and lane CPUs have the most recent version. I recall seeing that there are two browser version...

04/11/2026

Wanted Okkio Cameras on Bowl-Tech -

04/11/2026

Orange LEWUS motor start switches wanted on Bowl-Tech -

Looking for Orange LEWUS combo motor start switches TS-8-120V. They mount on combo motor head.

04/09/2026

A2 Deck problem discussion on Bowl-Tech -

Moving deck does final forward shift too soon after spotting. Spotting fingers knock pins over.

04/05/2026

Full Time A2 Mechanic Needed -

FatCats is looking for someone dependable and experienced to help keep our lanes running at their best. Located in Saratoga Springs Utah we are a 20 lane fun center. It is a Full-time position working on Brunswick A-2 pinsetters. Pay is $20-$25 per hour + benefits and company perks. If interested, p...

04/04/2026

A2 goes to 2nd ball sometimes on Bowl-Tech -

04/04/2026

DuoHD Frame counter no incrementing properly on Bowl-Tech -

Hi all, We recently upgraded from Solo to DuoHD, and after the change, the frame count at the front desk for lanes in Pay After is no longer matching with the actual amount bowled. During testing with two lanes active, the frames bowled on one lane would also increment the frame count on the other l...

04/03/2026

Sweep combi motor mount question on Bowl-Tech -

On my 6525s, the sweep combi motors are mounted to both an upper (with the hook) and lower mounting plates which both bolt to the bracket/drip pan assembly. I salvaged a bunch of 5850s for parts and noticed that the sweep combis only had the upper, hooked plate. (Yes, I know that the motors themselv...