DAD Motorsports

Call Directions Website Contact the organization

DAD Motorsports With our own in-house fabrication shop we specialize in custom metalwork and welding.

DAD Motorsports formally known as # # # Custom Rides is now a division of DADiabetes committed to the promotion / support of DADiabetes (Drinkers Against Diabetes).

 /DC front man Brian Johnson taking time to autograph "A TOUCH TOO MUCH" as well as our Angus Young Signature Series Gib...
10/28/2026

/DC front man Brian Johnson taking time to autograph "A TOUCH TOO MUCH" as well as our Angus Young Signature Series Gibson SG Guitar. Full video of event at DADmotorsports.com

Oct 23/26 "Nothing Else Matters" - UpdateShown here are a few shots of Brandon's hand fabricated tie-bar designed to spa...
10/23/2026

Oct 23/26 "Nothing Else Matters" - Update

Shown here are a few shots of Brandon's hand fabricated tie-bar designed to span the gap he's cut in the cowl under the windshield to accommodate our 14 inch engine set-back. As shown his design all starts with his hand drawn paper template and goes from there. Sadly, once the dash is installed it will never be seen, but we'll know it's there.

Oct 9/26 "Nothing Else Matters" - UpdateUsing Mitch's cardboard blower, Brandon was able to get the final measurements r...
10/10/2026

Oct 9/26 "Nothing Else Matters" - Update
Using Mitch's cardboard blower, Brandon was able to get the final measurements required to design & fabricate his 5 piece dash extension. With the dash originally welded in place, our version is designed to slide out when required for future maintenance. Our modified Impala dash bolts in place while encompassing the A-pillar chassis tubes and accommodating our 14 inch engine set-back.

It's not yet finished but I thought I'd give you a sneak peek... Stay tuned for much more.

Sept 26/26 "Nothing Else Matters" - UpdateShown here are a few shots of Mitch's cardboard duplicate of our Mooneyham 147...
09/26/2026

Sept 26/26 "Nothing Else Matters" - Update
Shown here are a few shots of Mitch's cardboard duplicate of our Mooneyham 1471 Blower and Enderle Injection Buzzard Catcher in place with our 14 inch engine set-back. Used as a mock-up Brandon can now take all the measurements needed and make his calculations for all the modifications required to accommodate the real stuff while making it all look sweet.

Sept 15/26 "Nothing Else Matters" - UpdateMore progress shots of our extensive firewall mods on the '60 Chevy
09/15/2026

Sept 15/26 "Nothing Else Matters" - Update
More progress shots of our extensive firewall mods on the '60 Chevy

Sept 10/26 "Nothing Else Matters" - UpdateIn the process of our firewall modifications, some rust was unearthed at the b...
09/10/2026

Sept 10/26 "Nothing Else Matters" - Update
In the process of our firewall modifications, some rust was unearthed at the bottom of the A-pillars at the lower door hinge reliefs. As shown here in the before & after photos Brandon hand-fabricated the replacement pieces required before welding them in place to make them all as they were new from the GM line in 1960. Now back to our firewall mods...

Sept 8/26 "Nothing Else Matters" - UpdateBrandon's firewall modifications on our project Impala are proving to be time c...
09/08/2026

Sept 8/26 "Nothing Else Matters" - Update
Brandon's firewall modifications on our project Impala are proving to be time consuming to say the least, but a one-off project car such as this... always is.

Aug/2/26 "Nothing Else Matters"- UpdateOur '60 Impala project underwent major surgery once again today as Brandon began ...
09/02/2026

Aug/2/26 "Nothing Else Matters"- Update
Our '60 Impala project underwent major surgery once again today as Brandon began his extensive firewall modifications. Stay tuned for more progress photos to follow...

Just had to share these shots of our '60 Impala's dash in place with the factory speedo that we plan to replace with a t...
09/01/2026

Just had to share these shots of our '60 Impala's dash in place with the factory speedo that we plan to replace with a tach in the existing bezel.

Aug 31/26 "Nothing Else Matters" - UpdateIt's been a full month since we've posted last but with some days off to enjoy ...
08/31/2026

Aug 31/26 "Nothing Else Matters" - Update

It's been a full month since we've posted last but with some days off to enjoy the summer with family, together with the time consuming task of completing this stage... August has passed. That said shown here are shots of Brandon's design and hand fabrication of our '60 Impala's dash. The extended setback design is all part of his master plan to accommodate the 14 inch setback of our 2500 HP engine.

Not just designed to fit, but built to be easily removable for any future maintenance of this one-off original. If you are wondering why... the answer is because he can. Where most would just leave out the stock dash of a custom chromoly round tube chassis car, Brandon has gone the extra mile to make our '60 Impala worthy of it's name... "Nothing Else Matters"

Hit "Like" if you like what you see to let him know and be sure to "Follow" us as we will continue to post photos as we progress with the build of this SFI 25.1 race capable, street legal, show car project. A level of attention to detail only available at DAD Motorsports.

Address

5467-B Island Highway S
Union Bay, BC
V0R3B0

Alerts

Be the first to know and let us send you an email when DAD Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Organization

Send a message to DAD Motorsports:

Shortcuts

Share

Nearby non profit organizations


Other Union Bay non profit organizations

Show All