The Global Irrigation Project

The Global Irrigation Project Launch: 6th of April 2022, 10:00 CET

FROM SALT TO CROP IN 3 STEPSThis initiative, from Dutch ground, is based on accelerating nature’s principles. By increas...
07/12/2022

FROM SALT TO CROP IN 3 STEPS

This initiative, from Dutch ground, is based on accelerating nature’s principles.
By increasing the formation of cloud decks, both sunlight is blocked, and rainfall in dry (deserted) areas is established.

Therefore, we can cool down the earth, provide water in places where it is needed the most and create electricity in the meantime.

But..

How to turn salt into crops?

In the upcoming weeks we will explain the three steps that are necessary to turn salt into crops.

Greenhouse gases, such as CO2, are one of the main causes of the global warming and burning fossil fuels is one of main ...
04/11/2022

Greenhouse gases, such as CO2, are one of the main causes of the global warming and burning fossil fuels is one of main contributors. European countries hence strive for a reduction of 49% in 2030. To achieve this, and fulfill our energy consumption, an enormous amount sustainable energy is needed. The wind turbines from the Global Irrigation Project bridge this gap, either with electricity or hydrogen.

Is it ethical to perform geo-engineering on this scale? Humanity already performs geo-engineering on an enormous scale, ...
04/11/2022

Is it ethical to perform geo-engineering on this scale?

Humanity already performs geo-engineering on an enormous scale, such that some consider it as irreversible. For example, the excessive exhaust of greenhouse gases, exhausting usage of valuable resources, polluting natural areas and other factors which have contributed to the increase of temperature on it, and all the consequences of that. The Global Irrigation Project is determined to reverse these effects, through cooling down the earth again.

Also, the process will be very gradual. The amount of cloud creators v***rizing water and creating clouds can be controlled into great detail and the amount of v***r created will be increased slowly. Hence, during the process it can be stopped if unexpected and unwanted (side)-effects appear. Everything will be monitored by a network of satellites and meteorologists, who make sure everything happens as it should. Also, the idea will be subjected to an extensive testing routine, to avoid problems and clear out as many effects as possible, prior to usage.

Additionally, in case of dangerous developments or problems, the entire system can be shutdown with a push on the button. In the hours that follow, the remaining water in the clouds will fall as precipitation, returning earth to its former position. The wind turbines, however, can still be used for the generation of sustainable energy at that point.

Water is the most essential element for life and humanity is searching for it, even on extraterrestrial planets. However...
04/11/2022

Water is the most essential element for life and humanity is searching for it, even on extraterrestrial planets. However, on planet earth itself billions of people are facing tragic water scarceness. It is already predicted by the WHO that in 2025 half of world’s population will be living in water-stressed areas and it will not stop there.

Especially countries in the so-called B-climates are likely to suffer from an extreme lack of water. The precipitation falling from the created clouds will increase the groundwater levels, create lakes, and prepare the ground for vegetation and agricultural activity. Water, as the kick starter of a flourishing area; which is now fighting drought.

#2025

02/11/2022

We all know the wind turbine as an imposing generator of sustainable energy. But to face the world’s crises, such as rising sea levels, starvation and a lack of drinkable water, a revolution is required. The Global Irrigation Project is determined to resolve global warming, by strategically placing wind turbines all over the globe, which will create clouds and enable precipitation. Welcome to a new world. Welcome to a world of rotating cloud creators.

The Global Irrigation Project aims to start a first testing phase around the so-called B-climates, with approximately 10...
26/10/2022

The Global Irrigation Project aims to start a first testing phase around the so-called B-climates, with approximately 100 turbines.
One of the next steps in the development of this testing phase will be to retrofit a wind turbine which is already in operation, to test the effects and possibilities of using existing wind turbines. Based on these results, more wind turbines can be used as a retrofit.

It should be noted, however, that the majority of the current wind turbines are located in Northern Europe, which is not a currently intended area of interest for the creating of clouds.

The energy generated by the wind turbines can be used for a wide variety of processes. Primarily, it will be used as a s...
19/10/2022

The energy generated by the wind turbines can be used for a wide variety of processes. Primarily, it will be used as a substitute for fossil fuels, since they are a major contributor to the global increase of temperature. Furthermore, the energy can be used in the areas which now suffer a lack of electricity. They can use this energy to harvest new fertile lands. Remainders of the energy can be converted to green hydrogen and used as fuel, by for instance vessels.

To get the energy to the desired destinations, the generated electricity is transported to shore with means of a cable network. This is a combination of converters and cables. However, there are limits to this, concerning the capacity of the network. An interesting development is the production of hydrogen on sea, which is transported to shore. An example of such a pilot project is PosHYdon.

Advantages of the usage of hydrogen is that the already existing gas-infrastructure can be used, and transport and storage are relatively easy. Also, since hydrogen is an energy carrier, the onshore electricity network needs no modification to handle the, by the wind turbines generated, energy peaks.

Since the turbines are driven by the wind, they can simultaneously generate electricity and produce v***r to create clou...
12/10/2022

Since the turbines are driven by the wind, they can simultaneously generate electricity and produce v***r to create clouds.
The energy that is generated by the turbines, while being driven by the wind, will be partially used to power the pump and other installations required for the v***rization process. However, most of the generated energy can be used for other specific purposes.

In this project, the option is discussed that the turbine will be driven by an engine to make it rotate, for example in the case of no wind. This could be done when v***rization is required at that specific moment. The engine could be powered with energy from other wind turbines, by a battery or with hydrogen.

To ensure that the precipitation will fall in the areas where it is needed the most, a network of satellites and meteoro...
05/10/2022

To ensure that the precipitation will fall in the areas where it is needed the most, a network of satellites and meteorologists will calculate the trajectory of the clouds.
By selectively turning on and off various wind turbines, the precipitation can be guided towards dry areas where the rain is needed the most.
With multiple wind parks spread over the globe, the clouds deck will be generated in a chosen geographical area. The precipitation will, based on the wind speed direction, eventually fall in the designated area.

The salt water is sprayed from nozzles on the turbine, the nozzles will accelerate the water v***r’s velocity. Consequen...
28/09/2022

The salt water is sprayed from nozzles on the turbine, the nozzles will accelerate the water v***r’s velocity. Consequently, the salt particles in the water are turned into aerosols. Aerosols are small particles, which act as cloud condensation nuclei (CCNs). These nuclei are the starter of cloud droplet, as they are the surface on which the water v***r condenses. To give an indication on the sizes, a typical raindrop measures a diameter of 2 mm, a typical cloud droplet 0.02 mm and a CCN 0.0002 mm.
The water will instantly ev***rate, which is due to the velocity and the heating that takes place in the nozzle. This v***rized water will condensate on the surface of the aerosols, which act as cloud condensation nuclei, and hence form cloud droplets. These droplets together form a cloud.

Adres

Amersfoort
3800–3829

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer The Global Irrigation Project nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Delen