LU DF LAB

LU DF LAB “DF LAB”– iespēja pielietot jaunās tehnoloģijas savu ideju realizācijā! Studijā pieejamas iekārtas pr

“DF LAB”–iespēja pielietot jaunās tehnoloģijas savu ideju realizācijā! Studijā pieejamas iekārtas produktu prototipēšanai, mobilo lietotņu, elektronikas, lietu interneta un virtuālās realitātes projektiem.

Jau ceturto gadu  organizētais “Women In Technology Hakaton”aicinās dalībniekus ar jebkādu pieredzi un zināšanu līmeni s...
22/02/2023

Jau ceturto gadu organizētais “Women In Technology Hakaton”
aicinās dalībniekus ar jebkādu pieredzi un zināšanu līmeni strādāt pie inovatīviem
risinājumiem, lai būvētu resursiem draudzīgāku un efektīvāku nākotni!

Vairāk informācijas un reģistrācija: https://ej.uz/Registration_Hackathon

Not sure to which NGO you should donate to support Ukraine? We built this short 5-question quiz to help you decide – sca...
07/03/2022

Not sure to which NGO you should donate to support Ukraine? We built this short 5-question quiz to help you decide – scan the QR code or go to https://ukraine-sos.org/.

If you aren't fighting, it doesn't mean you can't or aren't helping. We built this quiz to make sure your donations go to a cause you support.

Kopā ar  Latvijas Universitāte un University of Jyväskylä - Jyväskylän yliopisto 8. novembrī organizējam darbnīcu studen...
03/11/2021

Kopā ar Latvijas Universitāte un University of Jyväskylä - Jyväskylän yliopisto 8. novembrī organizējam darbnīcu studentiem lai veicinātu jaunu ideju izstrādi veselības un tehnoloģiju jomā.

Aicinam studējošos ņemt dalību, sadarbojoties ar somu studentiem un rādot idejas, kas būtu pielietojami sabiedrības veselības kā arī visos "patient journey" posmos.

Gaidam Jūsu pieteikumus šeit: https://link.webropolsurveys.com/EventParticipation/EventPublic/c15fbc85-bc01-4da4-b21c-9f90f764565d?displayId=Fin2374382&fbclid=IwAR0XOXE0zXSy-fOGlK6AqtykiBcnlpTSk1EJc-hldFT0a3J_GAcDeDSbEio

[ENG BELOW} Mājsēdes laikā turpinām kopstrādi no mājām. Visi iecerētie DF LAB Open Days pasākumi līdz 24. novebrim ir at...
26/10/2021

[ENG BELOW}
Mājsēdes laikā turpinām kopstrādi no mājām. Visi iecerētie DF LAB Open Days pasākumi līdz 24. novebrim ir atcelti.

Ja Tu vēlies iesaistīties prototipēšanas darbnīcā, raksti mums Facebook vai uz e-pastu [email protected] – mēs palīdzēsim sagatavoties brīdim, kad atkal drīkstēsim atvērt durvis.

[ENG]
Until the restrictions loosen, let's work alone together. DF LAB Open Days are paused until 24 November.

If you want to use the prototyping facilities, write to us on Facebook or send us an e-mail to [email protected]. We'll help you prepare for the time when opening up our doors will be safe again.

Here's our founder Emil Syundyukov talking about the cutting edge in biomedicine & tech starting at 4:41. This is a vide...
26/05/2021

Here's our founder Emil Syundyukov talking about the cutting edge in biomedicine & tech starting at 4:41.

This is a video by TheRaccoons for young people looking for a career direction. By the way, don't skip the video before and after him – there are great speakers from Mádara Organic Skincare and LV Koksnes ķīmijas institūts - Latvian State Institute of Wood Chemistry, too

Video link:

🩺 Veiksmīga medicīnas un ķīmijas nozaru attīstība ir cieši saistīta ar tehnoloģijām un to efektīvu izmantošanu. Plašāks skatījums par inovāciju izmantošanu ...

It's quite easy to see the placement of the two rings on these acrylic sheets. But it might not be as easy to feel them....
11/05/2021

It's quite easy to see the placement of the two rings on these acrylic sheets. But it might not be as easy to feel them.

Kaspars Eglitis helped out with creating stimuli specifically for spatial relationship determiniation for blindfolded users. This research is carried out by doc. Līga Zarina at the Laboratory for Perceptual and Cognitive Systems at Faculty of Computing, and greatly assisted by Gatis Podins.

All stimuli were created by using a laser cutter to engrave the circles in different releations to each other.

Want to break into the start-up community? Have a go at the Student Challenge by TechChill. Here's the sign-up form – ht...
08/05/2021

Want to break into the start-up community? Have a go at the Student Challenge by TechChill. Here's the sign-up form – https://ej.uz/student_challenge2021 (fill it by Monday!).

Here comes the Student Challenge! For multiple years in a row, it's the must have side event of TechChill. This year is no exception we are giving you, students, the chance to get to know the startup ecosystem and get your hands dirty!

The Challenge will consist of two events on the 11th and 13th of May where you will both get to:
– hear talks from startup founders and ecosystem players;
– challenge yourselves by developing your own ideas (as silly or serious as you want).

If you attend both events, you get a free ticket to TechChill 2021 this year (+ merch from the organizers 🤫)

Get your cracking ideas ready, sign up using the form below and we will see the wackiest of you at the official TechChill side event - Student Challenge 2021! Once you have signed up we will share the details on how to join the online event.

SIGN UP HERE UNTIL 10th of May👉https://ej.uz/student_challenge2021

More info in the event page: https://www.facebook.com/events/211500037149365.

Photo by Leon () on Unsplash.

One of the cooler builds we've seen in a while is Kalvis building a guitar prototype. Right now it looks a lot like a di...
04/05/2021

One of the cooler builds we've seen in a while is Kalvis building a guitar prototype.

Right now it looks a lot like a disassembled Bo Diddley cigar box, but it looks like it has all the necessary parts for it to eventually become playable.

Can't wait for this to be complete – maybe we can do a small gig with instruments built with our devices at DF LAB. You can join in – just hit us up at [email protected] or write to us in Facebook

Why buy something new when you can fix it using a 3D printer? Probably our first on-site visitor, he had worn out his he...
30/04/2021

Why buy something new when you can fix it using a 3D printer?

Probably our first on-site visitor, he had worn out his headphones and immersion blender. He came over and 3D printed new parts for them instead of tossing them or shipping parts from abroad.

Uncover your hidden biases!In collaboration with Safe Space and Konrad-Adenauer-Stiftung we've launched a version of the...
21/04/2021

Uncover your hidden biases!

In collaboration with Safe Space and Konrad-Adenauer-Stiftung we've launched a version of the well-known Implicit Association Test, or IAT, which saw the light in 1998. We're carrying this out to explore peoples' attitudes in several EU countries – Latvia, Lithuania, Estonia, Finland, Sweden, Denmark, and Germany.

If you're on a computer, try this test – you'll learn a little bit about how you view the world while helping us understand how we see the world, because the results will be a part of research at Latvijas Universitātes Sociālo zinātņu fakultāte - LU SZF & Latvijas Universitātes Datorikas fakultāte.

Try this test:

Learn more at www.hiddenbias.eu

Address

Raiņa Bulvāris 19, Room 303
Riga
LV-1586

Website

Alerts

Be the first to know and let us send you an email when LU DF LAB posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Organization

Send a message to LU DF LAB:

Share