Team Kilo Flight

21/08/2026

Every new chapter brings fresh vision, relentless drive, and higher engineering standards. As we set our sights on upcoming international milestones and continue pushing the boundaries of student motorsport, Team KILOFLIGHT is proud to officially unveil its 𝐄𝐱𝐞𝐜𝐮𝐭𝐢𝐯𝐞 𝐂𝐨𝐦𝐦𝐢𝐭𝐭𝐞𝐞 𝐟𝐨𝐫 𝐭𝐡𝐞 2025–2026 𝐬𝐞𝐬𝐬𝐢𝐨𝐧!

Stepping into leadership with dedication, technical excellence, and passion, this team of engineers is ready to drive our vision forward from the CAD workstation to the racetrack.

With the legacy left behind by our senior batches and the immense momentum built through national and international exhibitions and rigorous engineering developments, the 2025–2026 𝐜𝐨𝐦𝐦𝐢𝐭𝐭𝐞𝐞 is committed to taking 𝐓𝐞𝐚𝐦 𝐊𝐈𝐋𝐎𝐅𝐋𝐈𝐆𝐇𝐓 to new heights.

20/08/2026

𝙀𝙫𝙚𝙧𝙮 𝙘𝙝𝙖𝙥𝙩𝙚𝙧 𝙢𝙪𝙨𝙩 𝙘𝙤𝙢𝙚 𝙩𝙤 𝙖𝙣 𝙚𝙣𝙙, 𝙗𝙪𝙩 𝙨𝙤𝙢𝙚 𝙛𝙖𝙧𝙚𝙬𝙚𝙡𝙡𝙨 𝙡𝙚𝙖𝙫𝙚 𝙗𝙚𝙝𝙞𝙣𝙙 𝙖 𝙡𝙚𝙜𝙖𝙘𝙮 𝙩𝙝𝙖𝙩 𝙬𝙞𝙡𝙡 𝙞𝙣𝙨𝙥𝙞𝙧𝙚 𝙛𝙤𝙧 𝙮𝙚𝙖𝙧𝙨 𝙩𝙤 𝙘𝙤𝙢𝙚.

Throughout their remarkable journey, Batch 2K20 redefined what was possible for Team KILOFLIGHT. From endless late-night workshop sessions to laying our hands-on Formula Student foundation, they proved that with passion, grit, and engineering excellence, every challenge can be transformed into an achievement.

These milestones would not have been possible without the invaluable guidance of our respected teachers. We extend our deepest gratitude to our honorable Moderator, Prof. Dr. Md. Golam Kader Sir, along with Prof. Dr. Nurunnabi Mollah Sir and Muttaki Al Billah Sir. Their constant support, trust, and mentorship have played an instrumental role in shaping our journey.

To Batch 2K20, thank you for every weld, every design, and every milestone. As you begin your next chapter to drive the future, know that you will always remain an inseparable part of the KILOFLIGHT family.

Farewell, Batch 2K20. Your journey with us may have reached its final chapter, but your legacy will drive us forward. 🇧🇩⚡

19/08/2026

🏎️💨 𝙏𝙚𝙖𝙢 𝙆𝙄𝙇𝙊𝙁𝙇𝙄𝙂𝙃𝙏 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙡 𝙒𝙤𝙧𝙠𝙨𝙝𝙤𝙥 𝙛𝙤𝙧 2𝙆23 | 𝘾𝙡𝙖𝙨𝙨 06: 𝘽𝙧𝙖𝙠𝙞𝙣𝙜 𝙎𝙮𝙨𝙩𝙚𝙢𝙨 🛑🔧

Following the semester final examinations and break, we are back in action and resuming our technical workshop series!

Stopping power is just as critical as raw acceleration. In this session, our team members will dive into the core engineering, hydraulic calculations, balance bar bias, and FSAE rulebook compliance behind automotive deceleration systems.

📌 𝙎𝙚𝙨𝙨𝙞𝙤𝙣 𝙊𝙫𝙚𝙧𝙫𝙞𝙚𝙬
• 𝙏𝙤𝙥𝙞𝙘: Braking Systems
• 𝙎𝙚𝙨𝙨𝙞𝙤𝙣:Workshop Class 06
• 𝙏𝙞𝙢𝙚: 5:15 PM
• 𝙑𝙚𝙣𝙪𝙚: ME 401, Mechanical Engineering Building, KUET

👨‍🏫 𝘾𝙤𝙣𝙙𝙪𝙘𝙩𝙚𝙙 𝘽𝙮
• 𝙀𝙨𝙝𝙧𝙖𝙦 𝙉𝙞𝙥𝙪𝙣 — 𝘾𝙝𝙞𝙚𝙛 𝙏𝙚𝙘𝙝𝙣𝙞𝙘𝙖𝙡 𝘿𝙞𝙧𝙚𝙘𝙩𝙤𝙧, 𝙏𝙚𝙖𝙢 𝙆𝙄𝙇𝙊𝙁𝙇𝙄𝙂𝙃𝙏
• 𝙃𝙖𝙢𝙟𝙖𝙪𝙧 𝙍𝙖𝙝𝙢𝙖𝙣 — 𝙎𝙚𝙘𝙩𝙤𝙧 𝙇𝙚𝙖𝙙, 𝘽𝙧𝙖𝙠𝙞𝙣𝙜 & 𝙎𝙩𝙚𝙚𝙧𝙞𝙣𝙜, 𝙏𝙚𝙖𝙢 𝙆𝙄𝙇𝙊𝙁𝙇𝙄𝙂𝙃𝙏

20/07/2026

On July 17–18, 2026, 𝐓𝐞𝐚𝐦 𝐊𝐈𝐋𝐎𝐅𝐋𝐈𝐆𝐇𝐓 proudly took part in 𝐁𝐚𝐧𝐠𝐥𝐚𝐝𝐞𝐬𝐡 𝐀𝐮𝐭𝐨𝐟𝐞𝐬𝐭 2026, organized by .eeleven !

It was an unforgettable experience, made even better by the fact that five different Formula Student teams from across Bangladesh came together under one roof. The entire weekend was packed with learning, endless enthusiasm, and the incredible opportunity to hear about each other’s unique engineering journeys.

A massive shoutout and heartfelt 𝐓𝐇𝐀𝐍𝐊 𝐘𝐎𝐔 to our logistics partner, . 🚚⚡
Without their incredibly fast, reliable, and safe logistics support, safely transporting our vehicle and attending this event on time simply would not have been possible. Thank you for driving our vision forward!

Here is to the continued growth of motorsport and student engineering in Bangladesh!🏁

18/07/2026

Fsae Gang Assembled !
📍Autofest 2026

18/07/2026

See you guys 2 pm sharp.

Bangladesh AutoFest.

Join us for an exciting Live Session with the Formula Student team as they share the inspiring story behind their race car—covering their journey, engineering challenges, innovations, and future plans.

🕑 The live session starts sharp at 2:00 PM.

Everyone is invited to join us live and be part of the conversation!

Team Kilo Flight
Team Crack Platoon
IUB FormulaE
Formula IUT
MIST Blitz

10/07/2026

We are beyond excited to announce our participation in the highly anticipated 𝐁𝐚𝐧𝐠𝐥𝐚𝐝𝐞𝐬𝐡 𝐀𝐮𝐭𝐨𝐅𝐞𝐬𝐭 2026! For two unforgettable days, we are bringing our passion for motorsport, student engineering, and innovation to the biggest celebration of automotive culture in the country.

Event Link: https://www.facebook.com/events/aloki/bangladesh-autofest/1335751734767830/

05/06/2026

🌙 BACK TO THE GRIND AFTER EID! ⚙️

​Eid Mubarak, everyone! We hope you had a restful break. Now that the celebrations are over, it’s time to shift gears and jump right back into the fast lane!

​Tonight, we are kicking off our post-Eid sessions by mastering the ultimate tool for automotive 3D modeling: SolidWorks. Learn how to take your engineering concepts and turn them into track-ready designs.

​Here are the details for tonight's session:

​Topic: SolidWorks Design
​Instructor: Gazi Faysal Jubayer (Senior Executive)
​Date: Tonight, June 5, 2026
​Time: 9:00 PM
​Venue: Online (Link will be shared in the official group)

​Let's shake off the holiday mood and get back to building. See you online tonight! 🏎️💨

​

27/05/2026

Eid-Al-Adha Mubarak from KiloFlight✨🌙

Beyond sacrifice, Eid teaches us the beauty of faith, gratitude, and togetherness. May this Eid bring endless peace, happiness, and blessings into your life.

Let the spirit of sacrifice and gratitude make our hearts brighter and our bonds stronger. Celebrate the moments, cherish your loved ones, and make beautiful memories this Eid.🐐🤍

18/05/2026

📢 𝐖𝐨𝐫𝐤𝐬𝐡𝐨𝐩 𝐋𝐞𝐜𝐭𝐮𝐫𝐞 4: 𝐒𝐮𝐬𝐩𝐞𝐧𝐬𝐢𝐨𝐧 𝐒𝐲𝐬𝐭𝐞𝐦 | 𝐓𝐮𝐫𝐧𝐢𝐧𝐠 𝐏𝐨𝐰𝐞𝐫 𝐢𝐧𝐭𝐨 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞

Following our deep dive into the powertrain segment, Team KILOFLIGHT is thrilled to move on to the next critical phase of the Fundamentals of Automobile Engineering workshop for Batch 2K23.

It's time to talk about vehicle dynamics—shifting focus from how the car generates power to how it handles the track!

🏎️ 𝐋𝐞𝐜𝐭𝐮𝐫𝐞 4: 𝐒𝐮𝐬𝐩𝐞𝐧𝐬𝐢𝐨𝐧 𝐒𝐲𝐬𝐭𝐞𝐦

Get ready to explore the principles of mechanical grip, roll center placement, and the kinematics that keep a Formula Student car glued to the tarmac.

𝐈𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐨𝐫𝐬:
𝐍𝐚𝐳𝐢𝐳𝐮𝐬 𝐒𝐚𝐥𝐞𝐡𝐢𝐧 𝐍𝐢𝐫𝐨𝐛 (𝐒𝐞𝐧𝐢𝐨𝐫 𝐄𝐱𝐞𝐜𝐮𝐭𝐢𝐯𝐞, 𝐂𝐡𝐚𝐬𝐬𝐢𝐬 & 𝐒𝐮𝐬𝐩𝐞𝐧𝐬𝐢𝐨𝐧)
𝐅𝐚𝐡𝐢𝐦 𝐌𝐮𝐧𝐭𝐚𝐬𝐢𝐫 𝐍𝐮𝐫 (𝐒𝐞𝐧𝐢𝐨𝐫 𝐄𝐱𝐞𝐜𝐮𝐭𝐢𝐯𝐞, 𝐂𝐡𝐚𝐬𝐬𝐢𝐬 & 𝐒𝐮𝐬𝐩𝐞𝐧𝐬𝐢𝐨𝐧)

𝐃𝐚𝐭𝐞: Today, May 18, 2026

𝐓𝐢𝐦𝐞: 5:00 𝐏𝐌

𝐕𝐞𝐧𝐮𝐞: 𝐌𝐄 201

Don’t miss out! This session is foundational for anyone interested in handling, load transfer, and high-performance race engineering. Please ensure you arrive at 𝐌𝐄 201 on time.

See you all there!