09/10/2026
Shared from our colleagues at the EVR S&T and Pway
The Autumn activities of the S & T and Permanent Way departments are starting to get under way. The ground frame at Wash Green had the two extra levers fitted some time ago. However, eagle eyed readers will note that there is no locking tray at the rear, and the levers are secured out of use with shiny new bolts for the time being. Actually, they are not yet connected to anything, and can't be until the locking components have been manufactured and tested. Tony Watt has been making these and I gather he wil be able to start fitting these shortly.
The issue at the moment is that some of the existing levers work both Up and Down signals, that is to say, they permit trains to both enter and leave Wirksworth Station, so they can operate one train.
Once the extra levers are in commission, it will be possible, for example to hold a train in readiness in the station against a home signal at Stop, while a second train is permitted to enter the other platform, and then release the first train for immediate departure. This is not quite two train running, more like one and a half, but it does give a better margin for the preparation of catering coaches, wedding parties and other special events.
The long term plan is to install a proper signal box to control the exit from the yard on to the running line as well as a full range of operational moves, using the former Sneinton Signal Box which is being conserved in the car park. That will require a considerable quantity of mechanical signalling equipment, and these days we have to get it where we can. We may need around twenty levers. Once upon a time volunteers would be allowed to go onto the network to strip out redundant boxes, but these days that is not possible. Fortunately, there is quite a lot of equipment already in private hands and recently Emma Haywood and I went to visit a friend of ours who needs to make some space; there we recovered a quantity of mechanical signal box components, which are now safely stashed away. These items are essential, but by no means sufficent so if anyone has components for an LMS pattern 4 1/2" tappet frame available we would be very please to hear from them.
If anyone can help them please get in touch with Emma Haywood